Welcome to the Fuzion Online Store

Studio (Wired)

Showing 1–16 of 19 results

  • JS-1E

    JS-1E

    0 out of 5
    Request for quotation

    JTS

    Read MoreMore InformationRequest for quotation
    JS-1E

    Budget Large Diaphragm Studio Mic

  • NT1-A Matched Pair

    NT1-A Matched Pair

    0 out of 5
    Request for quotation

    Pair of acoustically matched NT1-A 1" cardioid condenser microphones.

    Read MoreMore InformationRequest for quotation
    NT1-A Matched Pair

    Pair of acoustically matched NT1-A 1" cardioid condenser microphones.

  • NT5

    NT5

    0 out of 5
    Request for quotation

    Compact 1/2″ cardioid condenser microphone. -Externally biased condenser -Gold sputtered 1/2” capsule -Heavy-duty satin-nickel plated body -Dual power operation -Surface mount circuitry -Low noise -Full frequency response -Available as Certified Match Pair The NT5 is RØDE’s premier small-diaphragm cardioid condenser microphone, sometimes referred to as a ‘pencil mic’. Intended for recording acoustic instruments, drum overheads,

    Read MoreMore InformationRequest for quotation
    NT5

    Compact 1/2″ cardioid condenser microphone.

    -Externally biased condenser
    -Gold sputtered 1/2” capsule
    -Heavy-duty satin-nickel plated body
    -Dual power operation
    -Surface mount circuitry
    -Low noise
    -Full frequency response
    -Available as Certified Match Pair
    The NT5 is RØDE’s premier small-diaphragm cardioid condenser microphone, sometimes referred to as a ‘pencil mic’.

    Intended for recording acoustic instruments, drum overheads, cy
    mbals and live performances, the compact externally polarized mic employs a 1/2″ capsule, an active J-FET impedance converter with bipolar output buffer.

    Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

    Expanding the NT5’s versatility, an interchangeable omnidirectional capsule (NT45-O) is available.

    Finished in durable satin nickel, the NT5 available as a single microphone or as an acoustically matched pair.

    Acoustic Principle : Pressure Gradient
    Active Electronics : JFET impedance converter with bipolar output buffer
    Capsule : 0.50″
    Address Type :End
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 100Ω
    Maximum SPL : 143dBSPL
    Maximum Output Level :13.9mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 16dBA
    Weight :101.00g
    Dimensions : 118.00mmH x 20.00mmW x 20.00mmD

     

  • NT1000

    NT1000

    0 out of 5
    Request for quotation

    Versatile 1″ cardioid condenser microphone -HF2 1” capsule with gold-plated diaphragm -Cardioid polar pattern -True condenser (externally biased) -Full frequency response -Ultra low noise -High strength welded and heat-treated mesh head -Internal capsule shock mounting With its ultra-low 6dBA self-noise and transformerless circuitry, the RØDE NT1000 exhibits exceptional performance when recording both vocals and instruments.

    Read MoreMore InformationRequest for quotation
    NT1000

    Versatile 1″ cardioid condenser microphone

    -HF2 1” capsule with gold-plated diaphragm
    -Cardioid polar pattern
    -True condenser (externally biased)
    -Full frequency response
    -Ultra low noise
    -High strength welded and heat-treated mesh head
    -Internal capsule shock mounting
    With its ultra-low 6dBA self-noise and transformerless circuitry, the RØDE NT1000 exhibits exceptional performance when recording both vocals and instruments.

    Voiced for versatility, it has been hailed by many as the ultimate microphone for grand piano and drum overheads. The NT1000 is also a fantastic vocal microphone.

    Acoustic Principle : Pressure Gradient
    Active Electronics : Unity-gain closed-loop impedance converter; JFET input with bipolar buffering
    Capsule : 1.00″
    Address Type :Side
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 100Ω
    Maximum SPL : 140dBSPL
    Maximum Output Level :13.0mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 6dBA
    Weight : 682.00g
    Dimensions : 209.00mmH x 54.00mmW x 54.00mmD

  • NT2000

    NT2000

    0 out of 5
    Request for quotation

    Seamlessly variable dual 1″ condenser microphone featuring continually variable polar pattern (omni through cardioid to figure-8), HPF and PAD. -Large 1” HF1 gold sputtered capsule -Continuously variable polar pattern, from Omni to Cardioid to Figure 8 controlled on the mic -Continuously variable PAD and High-Pass Filter -Ultra low noise, transformerless surface mount circuitry -Wide dynamic

    Read MoreMore InformationRequest for quotation
    NT2000

    Seamlessly variable dual 1″ condenser microphone featuring continually variable polar pattern (omni through cardioid to figure-8), HPF and PAD.

    -Large 1” HF1 gold sputtered capsule
    -Continuously variable polar pattern, from Omni to Cardioid to Figure 8 controlled on the mic
    -Continuously variable PAD and High-Pass Filter
    -Ultra low noise, transformerless surface mount circuitry
    -Wide dynamic range
    -High strength welded and heat treated steel mesh head
    -Internal capsule shock mounting
    -Includes SM2 shock mount and RC1 case.
    The RØDE NT2000 microphone is a studio-quality large diaphragm condenser with seamlessly variable polar patterns. Its polar patterns selection, filter and pad are conveniently located on the front of the microphone body for ease of use.

    Audiophile quality surface-mount electronics combined with a gold-sputtered dual 1″ capsule provide extremely low self-noise (7dBA) and a maximum SPL of 147 dB (up to 157 dB with pad fully engaged) giving an incredible amount of versatility and ensuring exceptional results.

    Acoustic Principle : Pressure Gradient
    Active Electronics : JFET impedance converter with bipolar output buffer
    Capsule : 1.00″
    Address Type :Side
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 200Ω
    Maximum SPL : 147dBSPL
    Maximum Output Level :15.0mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 7dBA
    Weight : 860.00g
    Dimensions : 208.00mmH x 55.00mmW x 55.00mmD

  • JS-1T

    JS-1T

    0 out of 5
    Request for quotation

    Multi-Pattern Large Diaphragm Studio Mic The JS-1T is a multi-pattern studio microphone with three selectable polar patterns: Cardioid, Omnidirectional and Figure-8 providing superb performance for vocals, acoustic Instruments, drum kits, percussion etc. for either Live or Studio Recording. Type : Large Diaphragm Condenser MicrophoneFrequency Response : 20~20,000 HzSensitivity(at 1000Hz) : -38 dB* (12.6mV) 0dB=1V /PaDirectional

    Read MoreMore InformationRequest for quotation
    JS-1T

    Multi-Pattern Large Diaphragm Studio Mic

    The JS-1T is a multi-pattern studio microphone with three selectable polar patterns: Cardioid, Omnidirectional and Figure-8 providing superb performance for vocals, acoustic Instruments, drum kits, percussion etc. for either Live or Studio Recording.

    Type : Large Diaphragm Condenser Microphone
    Frequency Response : 20~20,000 Hz
    Sensitivity(at 1000Hz) : -38 dB* (12.6mV) 0dB=1V /Pa
    Directional Pattern : Cardioid,Omnidirectional,figure-8
    Low Frequency Roll-off : 80Hz
    Impedance : 200Ω
    Max. SPL For 1% T.H.D. : 132 dB
    Signal To Noise Ratio : 78dB
    Power Supply : 36-52 VDC phantom power required
    Current Consumption : 1mA
    Output : 3 Pin XLR(M) (power module)
    Net Weight : 480 grams(16.9oz)
    Dimensions(mm) : Ø56mm(W)* 184mm(H)

  • JS-22

    JS-22

    0 out of 5
    Request for quotation

    1/2 Studio Condenser Microphone Based on the successful experience of JS-1 series JS-22 is designed for instrument miking from strings to percussions. The JS-22 is built on a solid brass with accurate processing. The 1/2” golden plated diaphragm is manually assembled by JTS craftsman. The precise designed circuit with low cut and pad feature provides

    Read MoreMore InformationRequest for quotation
    JS-22

    1/2 Studio Condenser Microphone

    Based on the successful experience of JS-1 series JS-22 is designed for instrument miking from strings to percussions. The JS-22 is built on a solid brass with accurate processing. The 1/2” golden plated diaphragm is manually assembled by JTS craftsman. The precise designed circuit with low cut and pad feature provides flat response. This microphone royally reproduces any kinds of instruments and vocals. Application : Acoustic guitar, acoustic bass, strings, piano, woodwinds, orchestra, stereo pick-up, ensemble vocals and cymbals.

    Type : Condenser Mic
    Frequency Response : 20~20,000 Hz
    Sensitivity : -36±3 dB* (15.8mV) 0dB=1V /Pa,1kHz
    Directional Pattern : Cardioid
    Attenuation Switch : -10dB
    Low Frequency Roll-off : 80Hz
    Impedance : 100Ω
    Max. SPL For 1% T.H.D. : 140 dB
    Signal To Noise Ratio : 78dB
    Power Supply : 36~52VDC phantom power
    Current consumption : ≤3mA
    Output : XLR-M type(power module)
    Dimensions(mm) : Ø22.5mm(W) * 150.5mm(H)

  • NT3

    NT3

    0 out of 5
    Request for quotation

    Multi-Powered 3/4″ Cardioid Condenser Microphone. P48 And 9V Battery Powered. -True condenser externally biased 3/4” capsule -Dual power operation -Cast metal body with durable satin-nickel finish -Transformerless output -Internal capsule shock mounting -High level of RF rejection -Audio-grade surface mount components -Full frequency response The NT3 is the definition of a studio workhorse. Featuring an

    Read MoreMore InformationRequest for quotation
    NT3

    Multi-Powered 3/4″ Cardioid Condenser Microphone. P48 And 9V Battery Powered.

    -True condenser externally biased 3/4” capsule
    -Dual power operation
    -Cast metal body with durable satin-nickel finish
    -Transformerless output
    -Internal capsule shock mounting
    -High level of RF rejection
    -Audio-grade surface mount components
    -Full frequency response
    The NT3 is the definition of a studio workhorse. Featuring an end-address 3/4″ gold-sputtered true-condenser transducer it provides incredible detail on almost any instrument you can imagine.

    Intended for studio, stage and location work, this versatile handheld, stand or boompole mounted microphone will give great results on drums, percussion, acoustic guitar, guitar amps, piano and all acoustic instruments as well as detailed voice reproduction when used as a handheld presentation microphone or indoor boom mic.

    For further versatility the NT3 can be powered by either P48 phantom power, or via a 9V battery for situations when power isn’t available via the console or camera. Its rugged and durable all-metal body and mesh head ensure that it is well protected both in the studio and out in the field.

    Acoustic Principle : Pressure Gradient
    Active Electronics : JFET impedance converter with bipolar output buffer
    Capsule : 0.75″
    Address Type :End
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 200Ω
    Maximum SPL : 140dBSPL
    Maximum Output Level :9.5mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-39.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 16dBA
    Weight : 371.00g
    Dimensions : 206.00mmH x 32.00mmW x 32.00mmD

     

  • NT2-A

    NT2-A

    0 out of 5
    Request for quotation

    Multi Pattern 1″ Dual Condenser Microphone, Featuring Switchable Omni -Large 1” HF1 gold sputtered capsule -On body control of polar pattern, HPF and PAD -Three position variable polar pattern – Omni, Cardioid or Figure 8 -Three position variable High-Pass Filter – Flat, 40Hz or 80Hz -Three position PAD – 0dB, -5dB or -10dB -Ultra low

    Read MoreMore InformationRequest for quotation
    NT2-A

    Multi Pattern 1″ Dual Condenser Microphone, Featuring Switchable Omni

    -Large 1” HF1 gold sputtered capsule
    -On body control of polar pattern, HPF and PAD
    -Three position variable polar pattern – Omni, Cardioid or Figure 8
    -Three position variable High-Pass Filter – Flat, 40Hz or 80Hz
    -Three position PAD – 0dB, -5dB or -10dB
    -Ultra low noise
    -Internal capsule shock mounting
    -Includes RØDE SM6 shock mount, pop filter and dust cover
    -Designed and manufactured in Australia.
    The NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large 1″ capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.

    The frequency and transient response of this transducer has been voiced to complement today’s modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.

    Supplied with the SM6 shock mount, dust cover, microphone cable and downloadable instructional video hosted by Grammy-nominated engineer and producer John Merchant showing a range of recording techniques specific to the NT2-A.

    Acoustic Principle : Pressure Gradient
    Active Electronics : JFET impedance converter with bipolar output buffer
    Capsule : 1.00″
    Address Type :Side
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 200Ω
    Maximum SPL : 147dBSPL
    Maximum Output Level :16.0mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 7dBA
    Weight : 860.00g
    Dimensions : 209.00mmH x 55.00mmW x 55.00mmD

  • NTG3B

    NTG3B

    0 out of 5
    Request for quotation

    Precision Broadcast-Grade Super Cardioid Shotgun Mic. Withstands Adverse Environmental Conditions. Matte Black Finish

    Read MoreMore InformationRequest for quotation
    NTG3B

    Precision Broadcast-Grade Super Cardioid Shotgun Mic. Withstands Adverse Environmental Conditions. Matte Black Finish

  • NTK

    NTK

    0 out of 5
    Request for quotation

    Versatile Class A Valve 1″ Cardioid Condenser Microphone -Large 1” capsule with gold plated diaphragm -Class “A” valve circuitry -Hand selected and graded 6922 twin-triode valve -Dedicated power supply -Internal capsule shock mounting -High level of RF rejection -Ultra low noise -Wide dynamic range -High strength heat treated steel mesh head Like it’s bigger brother

    Read MoreMore InformationRequest for quotation
    NTK

    Versatile Class A Valve 1″ Cardioid Condenser Microphone

    -Large 1” capsule with gold plated diaphragm
    -Class “A” valve circuitry
    -Hand selected and graded 6922 twin-triode valve
    -Dedicated power supply
    -Internal capsule shock mounting
    -High level of RF rejection
    -Ultra low noise
    -Wide dynamic range
    -High strength heat treated steel mesh head
    Like it’s bigger brother the K2, the RØDE NTK is a premium valve condenser microphone designed to provide incredible detail and warmth in the studio. Its cardioid polar pattern is perfect for most single instrument recording scenarios.

    The electronic circuitry complementing this very sensitive transducer includes a hand-selected twin-triode 6922 valve and audiophile grade components. The result is an ultra-wide dynamic range, low noise, and stunning tube warmth. The NTK’s rich valve sound is ideal for vocals, acoustic instruments, drum overheads, guitar amps and pianos.

    Acoustic Principle : Pressure Gradient
    Active Electronics : Valve/tube impedance converter with bipolar output buffer
    Capsule : 1.00″
    Address Type :Side
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 200Ω
    Maximum SPL : 158dBSPL
    Maximum Output Level :29.0mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-38.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 12dBA
    Weight :760.00g
    Dimensions : 208.00mmH x 55.00mmW x 55.00mmD

  • K2

    K2

    0 out of 5
    Request for quotation

    Seamlessly Variable Dual 1″ Condenser Valve Microphone Featuring Continually -Large 1″ capsule with gold sputtered diaphragm and internal shock mounting -Ultra low noise -Wide dynamic range -Class ‘A’ valve circuitry -Hand-selected and graded 6922 twin-triode valve -Dedicated Power Supply -High strength welded and heat-treated steel mesh head -Continuously variable polar patterns. From omni, through cardioid

    Read MoreMore InformationRequest for quotation
    K2

    Seamlessly Variable Dual 1″ Condenser Valve Microphone Featuring Continually

    -Large 1″ capsule with gold sputtered diaphragm and internal shock mounting
    -Ultra low noise
    -Wide dynamic range
    -Class ‘A’ valve circuitry
    -Hand-selected and graded 6922 twin-triode valve
    -Dedicated Power Supply
    -High strength welded and heat-treated steel mesh head
    -Continuously variable polar patterns. From omni, through cardioid to figure 8, controlled at the power supply.
    The RØDE K2 is a premium valve condenser microphone featuring dual 1” gold sputtered diaphragms. Infinitely variable control of the polar pattern from omnidirectional through cardioid and bidirectional/figure-8 provides the freedom and flexibility to excel in any recording situation.

    High-performance specifications (including a maximum SPL of 162dB) are combined with the character and subtleties of the legendary mics of the 1950s to provide a microphone that not only provides world-class vocals but is perfectly at home recording a wide range of instruments both up-close or in a wider ‘room’ capacity.

    Acoustic Principle : Pressure Gradient
    Active Electronics : Valve/tube impedance converter with bipolar output buffer
    Capsule : 1.00″
    Address Type :Side
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 200Ω
    Maximum SPL : 162dBSPL
    Maximum Output Level :30.0mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 10dBA
    Weight :815.00g
    Dimensions : 208.00mmH x 55.00mmW x 55.00mmD

  • NT6

    NT6

    0 out of 5
    Request for quotation

    Compact 1/2″ Condenser Microphone With 3m (10″) Kevlar Reinforced Cable -1/2” condenser capsule with remote preamp -Gold sputtered externally biased condenser -Two position PAD – 0dB and -10dB -Two position High Pass Filter – flat and 80Hz -Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windshield and zip pouch -Heavy duty satin-nickel plated body

    Read MoreMore InformationRequest for quotation
    NT6

    Compact 1/2″ Condenser Microphone With 3m (10″) Kevlar Reinforced Cable

    -1/2” condenser capsule with remote preamp
    -Gold sputtered externally biased condenser
    -Two position PAD – 0dB and -10dB
    -Two position High Pass Filter – flat and 80Hz
    -Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windshield and zip pouch
    -Heavy duty satin-nickel plated body
    -Low noise and full frequency response
    -Designed and manufactured in Australia.
    The RØDE NT6 is an extremely compact 1/2″ cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.

    Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording.

    The microphone is split into two modular components, joined by via a custom 3m (10′) shielded, Kevlar® reinforced cable.

    Featuring a gold-sputtered, true-condenser capsule, the NT6 capsule head measures 45mm (1.8”) in length and weighs only 42gm (1.5oz). The included all-metal, multi-position mounting ring provides 180 degrees of vertical rotation.

    The NT6 preamp-body incorporates both a high-pass filter and pad setting. The high-pass filter can be introduced to cut vibration, rumble and undesired sounds sources under 80Hz, while the PAD offers a -10dB level attenuation, useful when recording louder sound sources.

    The NT6’s small form factor make it an ideal small diaphragm cardioid microphone for use in the Mid-Side (M/S) stereo array, in combination with a figure-8 large diaphragm microphone such as the NT2-A, NT2000 or K2.

    Acoustic Principle : Pressure Gradient
    Active Electronics : JFET impedance converter with bipolar output buffer
    Capsule : 0.50″
    Address Type :End
    Frequency Range : 40Hz – 20kHz
    Output Impedance : 200Ω
    Maximum SPL : 135dBSPL
    Maximum Output Level :6.0mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 19dBA
    Weight :386.00g
    Dimensions : 189.00mmH x 64.00mmW x 20.00mmD

  • NT55

    NT55

    0 out of 5
    Request for quotation

    Compact 1/2″ Cardioid And Omni Condenser Microphone. -Externally biased condenser -Cardioid or Omni polar pattern using included interchangable capsules -Gold sputtered 1/2” capsule -Three position PAD – 0dB, -10dB and -20dB -Three position High-Pass Filter – flat, 75Hz and 150Hz -Surface mount circuitry -Low noise -Available as Certified Matched Pair. Like the NT5, the RØDE

    Read MoreMore InformationRequest for quotation
    NT55

    Compact 1/2″ Cardioid And Omni Condenser Microphone.

    -Externally biased condenser
    -Cardioid or Omni polar pattern using included interchangable capsules
    -Gold sputtered 1/2” capsule
    -Three position PAD – 0dB, -10dB and -20dB
    -Three position High-Pass Filter – flat, 75Hz and 150Hz
    -Surface mount circuitry
    -Low noise
    -Available as Certified Matched Pair.
    Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a ‘pencil mic’. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.

    Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2″ capsule, an active J-FET impedance converter with bipolar output buffer.

    Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

    Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair.

    Acoustic Principle : Pressure Gradient
    Active Electronics : JFET impedance converter with bipolar output buffer
    Capsule : 0.50″
    Address Type :End
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 100Ω
    Maximum SPL : 136dBSPL
    Maximum Output Level :8.0mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 15dBA
    Weight :110.00g
    Dimensions : 145.00mmH x 20.00mmW x 20.00mmD

  • NT1-A

    NT1-A

    0 out of 5
    Request for quotation

    Incredibly Quiet 1″ Cardioid Condenser Microphone -Large 1” capsule with gold plated diaphragm -Cardioid polar pattern -Ultra low noise, self noise of only 5dB (A) -Wide dynamic range -True condenser (externally biased) -Internal capsule shock mounting -Includes RØDE SM6 shock mount, pop filter and dust cover The RØDE NT1-A 1″ cardioid condenser microphone has become

    Read MoreMore InformationRequest for quotation
    NT1-A

    Incredibly Quiet 1″ Cardioid Condenser Microphone

    -Large 1” capsule with gold plated diaphragm
    -Cardioid polar pattern
    -Ultra low noise, self noise of only 5dB (A)
    -Wide dynamic range
    -True condenser (externally biased)
    -Internal capsule shock mounting
    -Includes RØDE SM6 shock mount, pop filter and dust cover
    The RØDE NT1-A 1″ cardioid condenser microphone has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability typically only featured on some of the world’s most expensive microphones.

    With a self-noise level of only 5dBA it is widely recognised (along with the NT1) as one the world’s quietest studio microphones. This low noise makes it an ideal vocal microphone as well as perfect for recording guitars and percussion.

    Packaged in the ‘Complete Vocal Recording Solution’, the NT1-A includes everything you need to get a truly professional vocal recording and is ideal for home studio recording.

    A studio grade pop shield and shock mount is included, along with a premium 20′ microphone cable, dust cover, and an downloadable instructional video packed with recording tips.

    Acoustic Principle : Pressure Gradient
    Active Electronics : JFET impedance converter with bipolar output buffer
    Capsule : 1.00″
    Address Type :Side
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 100Ω
    Maximum SPL : 137dBSPL
    Maximum Output Level :13.7mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 5dBA
    Weight : 326.00g
    Dimensions : 190.00mmH x 50.00mmW x 50.00mmD

  • NT1 KIT

    NT1 Kit

    0 out of 5
    Request for quotation

    All New Fixed Cardioid 1″ Condenser Microphone With Only 4.5dBA Of Self Noise. Package Includes NT1 And SMR Shock Mount.

    Read MoreMore InformationRequest for quotation
    NT1 Kit

    All New Fixed Cardioid 1″ Condenser Microphone With Only 4.5dBA Of Self Noise. Package Includes NT1 And SMR Shock Mount.