Welcome to the Fuzion Online Store
Headphone Amplifiers
Showing all 2 results
-
RMP-D8
For the last decade, the world’s leading live sound engineers have chosen Rupert Neve Designs as some of the only analog equipment to accompany their digital touring rigs. With mastering-grade 24-bit 192kHz converters and full Dante integration, the RMP-D8 finally offers the live sound world something that studios have always coveted: the sound of Rupert
Read MoreMore InformationRequest for quotationRMP-D8For the last decade, the world’s leading live sound engineers have chosen Rupert Neve Designs as some of the only analog equipment to accompany their digital touring rigs. With mastering-grade 24-bit 192kHz converters and full Dante integration, the RMP-D8 finally offers the live sound world something that studios have always coveted: the sound of Rupert Neve Designs.
The heart of the RMP-D8 lies in the modular mic preamp cards featuring Mr. Rupert Neve’s custom transformer designs. Unlike other integrated Dante mic preamp designs that rely primarily on a single IC for gain & tone, each channel on the RMP-D8 has a fully-realized class-A microphone preamplifier feeding a custom transformer, maintaining the high standards of Rupert Neve Designs’ standalone preamplifiers.
Noise
150 Ohm Balanced Source, AES Output, 22 Hz to 22 kHz, un-weighted+60dB Gain
-91 dBFS
Unity Gain
-110 dBFS
Frequency Response
0dBu , Unity Gain, 96Khz
30Hz to 45kHz +/- 0.2 dB
10Hz -3 dB
Input Impedance
5.5 kOhms
Gain
0 to 60 dB in 1 dB steps
High Pass Filter
-3dB @ 80 Hz, 12 dB/Octave Slope
Pad
-10 dB
Signal to Noise Ratio
84.4 dB
Dynamic Range
110 dB
Maximum Input Level
+25.5 dBu
Shipping Weight
17.6 lbs. (8 kg)
Shipping Dimensions
22” (W) x 18” (D) x 9” (H) 55.9 cm (W) x 45.7 cm (D) x 22.9 cm (H)
Power Cord Type
IEC Standard 3 Pin 18AWG Latching Type -
RNHP
Precision Headphone Amplifier Based on the headphone output circuit in the 5060 Centerpiece Desktop Mixer, the RNHP is a dedicated 24V reference-quality headphone amplifier with specifically-calibrated +4dBu balanced line, unbalanced RCA and 3.5mm (1/8”) inputs, housed in a rugged VESA-mountable steel chassis. With effortless, wide-open sonic performance and the ability to drive any pair of
Read MoreMore InformationRequest for quotationRNHPPrecision Headphone Amplifier
Based on the headphone output circuit in the 5060 Centerpiece Desktop Mixer, the RNHP is a dedicated 24V reference-quality headphone amplifier with specifically-calibrated +4dBu balanced line, unbalanced RCA and 3.5mm (1/8”) inputs, housed in a rugged VESA-mountable steel chassis. With effortless, wide-open sonic performance and the ability to drive any pair of headphones without compromise, the RNHP allows you to perform, mix and enjoy your music with a new level of clarity.
Maximum Input Levels
“A” XLR I/P: +22.8 dBu @1kHz
“B” RCA I/P: +14.7dBu @1kHz,
“C” 3.5mm I/P: +3.3dBu @1kHz
Output Power:
As measured with typical headphones, Z=44 Ω: 3.617 VAC RMS @1kHz = 300mW RMS
16 Ω typical Load: 1.933 VAC RMS @1kHz = 230mW RMS
150 Ω typical Load: 5.108 VAC RMS @1kHz = 175mW RMS
Output Impedance
.08 Ω @ 1KHz, 16-150 Ω load, 0dBu input
Frequency Response
+/- .2dB from 10Hz to 120KHz
Noise
Measured with typical headphones, Z=44 Ω, BW 22Hz – 22kHz
“A” XLR Input: -101.9dBV,
“B” RCA Input: -100.9dBV
“C” 3.5mm Input: -88.8dBV
Dimensions
6.5” wide x 4.6” deep and 1.9” tall
Power Supply Requirements
24VDC @ 0.25Amp (6 watt) minimum. Use with supplied power adapter, as this has been carefully selected for best output power and noise performance. May be used with a properly configured 24V battery as well.RNDI5060 Centerpiece5088511