Welcome to the Fuzion Online Store

Shotgun

Showing all 8 results

  • VideoMic Pro VMPR

    VideoMic Pro (VMPR)

    0 out of 5
    Request for quotation

    -Rycote® Lyre® shock mounting onboard -All-new capsule with lower noise and higher sensitivity -Broadcast recording quality condenser microphone -Compact form factor (150mm/6” length) -Ultra lightweight (85g/3oz) -9V battery powered – over 70 hours use (alkaline) -Integrated shock mounting -Integrated foam windscreen -3.5mm stereo mini-jack output (dual mono) -Two step High Pass Filter (flat, 80Hz) -Three

    Read MoreMore InformationRequest for quotation
    VideoMic Pro (VMPR)

    -Rycote® Lyre® shock mounting onboard
    -All-new capsule with lower noise and higher sensitivity
    -Broadcast recording quality condenser microphone
    -Compact form factor (150mm/6” length)
    -Ultra lightweight (85g/3oz)
    -9V battery powered – over 70 hours use (alkaline)
    -Integrated shock mounting
    -Integrated foam windscreen
    -3.5mm stereo mini-jack output (dual mono)
    -Two step High Pass Filter (flat, 80Hz)
    -Three position level control (-10dB, 0, +20dB)
    -Camera shoe mount with 3/8” thread for easy boompole mounting.
    The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.

    At the heart of the VideoMic Pro is an all-new 1/2″ condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.

    The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

    Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone’s native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

    Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera’s preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera’s comparatively low quality audio circuitry.

    The microphone uses a standard sized shoe mount for on camera use, and features a 3/8″ thread in the base of the mount for easy boom pole mounting.

    The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.

    Acoustic Principle : Line Gradient
    Active Electronics :JFET impedance converter
    Capsule : 0.50″
    Address Type :End
    Frequency Range : 40Hz – 20kHz (selected HPF @80)
    Output Impedance : 200Ω
    Maximum SPL :134dBSPL
    Maximum Output Level :6.9mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 14dBA
    Weight :85g
    Dimensions :100mmH x 75mmW x 170mmD

  • NTG3

    NTG3

    0 out of 5
    Request for quotation

    Precision broadcast-grade super cardioid shotgun mic. Withstands adverse environmental conditions. Satin nickel finish. -Superior broadcast sound quality -High Sensitivity -Super-cardioid polar pattern -Designed to withstand adverse environmental conditions -50% less self-noise than the majority of shotgun microphones -Extremely low handling noise -High level of immunity to radio frequency interference -True Condenser (external RF biased) -Includes

    Read MoreMore InformationRequest for quotation
    NTG3

    Precision broadcast-grade super cardioid shotgun mic. Withstands adverse environmental conditions. Satin nickel finish.

    -Superior broadcast sound quality
    -High Sensitivity
    -Super-cardioid polar pattern
    -Designed to withstand adverse environmental conditions
    -50% less self-noise than the majority of shotgun microphones
    -Extremely low handling noise
    -High level of immunity to radio frequency interference
    -True Condenser (external RF biased)
    -Includes durable aluminium storage cylinder for transport, pop filter, mic clip and large zip pouch
    -Designed for professional use on film, television, ENG & wherever high resolution broadcast audio is required
    The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required.

    As RØDE’s premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue.

    Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight.

    Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time.

    A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone’s rugged performance credentials.

    Acoustic Principle : Line Gradient
    Active Electronics : RF Bias
    Capsule : 0.50″
    Address Type :End
    Frequency Range : 40Hz – 20kHz
    Output Impedance : 25Ω
    Maximum SPL : 130dBSPL
    Maximum Output Level :8.2mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 13dBA
    Weight :163.00g
    Dimensions :255.00mmH x 19.00mmW x 19.00mmD

  • NTG8

    NTG8

    0 out of 5
    Request for quotation

    Precision Broadcast-Grade Highly Directional Super Cardioid Shotgun Mic. -Superior broadcast sound quality -High Sensitivity -Super-cardioid polar pattern -Highly directional polar response -Natural sounding audio both on and off-axis -Designed to withstand adverse environmental conditions -Extremely low handling noise -High level of immunity to radio frequency interference -True Condenser (external RF biased) -Includes weatherproof aluminium cylinder

    Read MoreMore InformationRequest for quotation
    NTG8

    Precision Broadcast-Grade Highly Directional Super Cardioid Shotgun Mic.

    -Superior broadcast sound quality
    -High Sensitivity
    -Super-cardioid polar pattern
    -Highly directional polar response
    -Natural sounding audio both on and off-axis
    -Designed to withstand adverse environmental conditions
    -Extremely low handling noise
    -High level of immunity to radio frequency interference
    -True Condenser (external RF biased)
    -Includes weatherproof aluminium cylinder for transport, SM8 shock mount and wind shield
    Based on RØDE’s award winning NTG3 shotgun microphone, the NTG8 is a broadcast quality RF-bias shotgun microphone that exhibits increased directionality across a wide frequency response range. This makes the NTG8 the perfect microphone for film, television, sports and outdoor broadcasting, live performance, and any professional distance miking application.

    Like the NTG3, the NTG8 features low self-noise, natural sound without colouration both on and off-axis, and RF bias technology to ensure that it is almost completely resistant to high humidity environments which could cause other condenser microphones to fail.

    The NTG8 is finished in matte black and supplied with a specially designed shock mount (SM8) that is engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the microphone. A rugged weatherproof aluminium cylinder is also included, providing ultimate protection for the microphone when in transport or storage. The WSNTG8 windshield completes the package, providing light environmental protection.

    Acoustic Principle : Line Gradient
    Active Electronics : RF Bias
    Capsule : 0.50″
    Address Type :End
    Frequency Range : 40Hz – 20kHz
    Output Impedance : 25Ω
    Maximum SPL : 124dBSPL
    Maximum Output Level :8.2mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-20.0dB re 1 Volt/Pascal (97.50mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 8dBA
    Weight :345.00g
    Dimensions :559.00mmH x 19.00mmW x 19.00mmD

  • NTG4+

    NTG4+

    0 out of 5
    Request for quotation

    Premium Shotgun Microphone With Rechargeable Llithium Battery, Digital Switching, -10dB Pad, HPF And HF Boost. P48 Or Self Powered. USB Charge -Broadcast sound quality -Low noise circuitry -Internal rechargeable lithium battery, supplying over 150 hours operation -Fully charged in under two hours via MicroUSB -Rugged metal construction -Convenient digital switching -High Frequency Boost -High Pass

    Read MoreMore InformationRequest for quotation
    NTG4+

    Premium Shotgun Microphone With Rechargeable Llithium Battery, Digital Switching, -10dB Pad, HPF And HF Boost. P48 Or Self Powered. USB Charge

    -Broadcast sound quality
    -Low noise circuitry
    -Internal rechargeable lithium battery, supplying over 150 hours operation
    -Fully charged in under two hours via MicroUSB
    -Rugged metal construction
    -Convenient digital switching
    -High Frequency Boost
    -High Pass Filter (Flat/75Hz)
    -PAD (-10db)
    -MicroUSB cable included
    Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching.

    The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.

    Acoustic Principle : Line Gradient
    Capsule : 0.50″
    Address Type :End
    Frequency Range : 20Hz – 20kHz (selected HPF @75Hz)
    Output Impedance :200Ω
    Maximum SPL : 135dBSPL
    Sensitivity :-32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 16dBA
    Weight :176g
    Dimensions :278mmH x 22mmW x 22mmD

  • NTG4

    NTG4

    0 out of 5
    Request for quotation

    Premium Shotgun Microphone With Digital Switching, -10dB Pad, HPF And HF Boost. P48 Powered -Broadcast sound quality -Low noise circuitry -Rugged metal construction -Convenient digital switching -High Frequency Boost -High Pass Filter (Flat/75Hz) -PAD (-10db) The NTG4 builds on the platform created by RØDE’s award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to

    Read MoreMore InformationRequest for quotation
    NTG4

    Premium Shotgun Microphone With Digital Switching, -10dB Pad, HPF And HF Boost. P48 Powered

    -Broadcast sound quality
    -Low noise circuitry
    -Rugged metal construction
    -Convenient digital switching
    -High Frequency Boost
    -High Pass Filter (Flat/75Hz)
    -PAD (-10db)
    The NTG4 builds on the platform created by RØDE’s award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.

    Acoustic Principle : Line Gradient
    Capsule : 0.50″
    Address Type :End
    Frequency Range :20Hz – 20kHz (selected HPF @75Hz)
    Output Impedance :200Ω
    Maximum SPL : 135dBSPL
    Sensitivity :-32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 16dBA
    Weight :126g
    Dimensions :225mmH x 22mmW x 22mmD

  • NTG2

    NTG2

    0 out of 5
    Request for quotation

    Directional Super Cardioid Condenser Shotgun Microphone With Switchable HPF. P48 Or AA Battery Powered. -Broadcast sound quality -Low noise circuitry -Condenser transducer -Rugged metal construction -Two step High Pass Filter (Flat/80Hz) -P48 phantom power or AA battery option -Low handling noise -Low weight – 161g (5.17 oz.) -Includes mic clip, wind shield and zip case

    Read MoreMore InformationRequest for quotation
    NTG2

    Directional Super Cardioid Condenser Shotgun Microphone With Switchable HPF. P48 Or AA Battery Powered.

    -Broadcast sound quality
    -Low noise circuitry
    -Condenser transducer
    -Rugged metal construction
    -Two step High Pass Filter (Flat/80Hz)
    -P48 phantom power or AA battery option
    -Low handling noise
    -Low weight – 161g (5.17 oz.)
    -Includes mic clip, wind shield and zip case
    -Ideal for professional applications within the film, video, television and production industries
    The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

    Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

    In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

    The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.

    The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications.

    Acoustic Principle : Line Gradient
    Active Electronics : JFET impedance convertor with balanced transformer output
    Capsule : 0.50″
    Address Type :End
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 250Ω
    Maximum SPL : 131dBSPL
    Maximum Output Level :6.9mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 18dBA
    Weight :161.00g
    Dimensions :280.00mmH x 22.00mmW x 22.00mmD

  • NTG1

    NTG1

    0 out of 5
    Request for quotation

    Directional Super Cardioid Condenser Shotgun Microphone With Switchable HPF -Broadcast sound quality -Low noise circuitry -Super-cardioid polar pattern -Condenser transducer -Rugged metal construction -Two step High Pass Filter (Flat/80Hz) -Low handling noise -Low weight – 105g (3 oz.) -Includes mic clip, wind shield and zip case -Ideal for professional applications within the film, video, television

    Read MoreMore InformationRequest for quotation
    NTG1

    Directional Super Cardioid Condenser Shotgun Microphone With Switchable HPF

    -Broadcast sound quality
    -Low noise circuitry
    -Super-cardioid polar pattern
    -Condenser transducer
    -Rugged metal construction
    -Two step High Pass Filter (Flat/80Hz)
    -Low handling noise
    -Low weight – 105g (3 oz.)
    -Includes mic clip, wind shield and zip case
    -Ideal for professional applications within the film, video, television and production industries
    The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

    Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.

    In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

    The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications.

    Acoustic Principle : Line Gradient
    Active Electronics : JFET impedance convertor with bipolar output buffer
    Capsule : 0.50″
    Address Type :End
    Frequency Range : 20Hz – 20kHz
    Output Impedance : 50Ω
    Maximum SPL : 139dBSPL
    Maximum Output Level :6.9mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 18dBA
    Weight :105.00g
    Dimensions :219.00mmH x 22.00mmW x 22.00mmD

  • VideoMic Pro + VMP+

    VideoMic Pro + (VMP+)

    0 out of 5
    Request for quotation

    -Automatic Power Function with plug-in power -Power via LB-1, 2 x AA Batteries, Micro USB -Ships with LB-1 Lithium-Ion Rechargeable Battery, Detachable 3.5mm TRS Cable, Micro USB Cable -Built-in Battery Door -Optimised Windshield Shape -Digital Switching The RØDE VideoMic Pro+ is a new addition to the best-in-market on-camera category. It is a true shotgun microphone

    Read MoreMore InformationRequest for quotation
    VideoMic Pro + (VMP+)

    -Automatic Power Function with plug-in power
    -Power via LB-1, 2 x AA Batteries, Micro USB
    -Ships with LB-1 Lithium-Ion Rechargeable Battery, Detachable 3.5mm TRS Cable, Micro USB Cable
    -Built-in Battery Door
    -Optimised Windshield Shape
    -Digital Switching

    The RØDE VideoMic Pro+ is a new addition to the best-in-market on-camera category. It is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.

    Still with the best-in-class Rycote Lyre suspension system onboard, the VideoMic Pro+ improves on the existing VideoMic Pro capsule/line tube and windshield, plus boasts a host of new features.

    Automatic Power Function (with plug-in power availability) is perfect for the run-and-gun shooter, automatically turning the microphone off when unplugged from the camera.

    Built-in Battery Door makes replacing the battery a breeze – plus it won’t get lost.

    Power options the VideoMic Pro+ can be powered by the all-new and included RØDE LB-1 Lithium-Ion Rechargeable Battery, 2 x AA Batteries or continuously via Micro USB.

    Digital Switching – will ensure the user has ultimate capture of the audio signal at the source, reducing post production and editing times.

    The Digital Switching includes:

    2-Stage High Pass Filter to reduce low frequencies such as rumble from traffic or air conditioning
    3-Stage Gain Control, with +20dB function – designed to improve audio quality on DSLR or mirrorless cameras
    High Frequency Boost will boost high frequencies enhancing detail and clarity in the recording
    Safety Channel to help ensure the signal does not clip when unexpected spikes occur

    Acoustic Principle : Line Gradient
    Active Electronics :JFET impedance converter
    Capsule : 0.55″
    Address Type :End
    Frequency Range : 20Hz – 20kHz (selected HPF @75Hz/150Hz)
    Output Impedance : 200Ω
    Maximum SPL :133dBSPL
    Maximum Output Level :7.7dBu (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity :-33.6dB re 1 Volt/Pascal (21.20mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) : 14dBA
    Weight :122g
    Dimensions :111mmH x 66mmW x 170mmD