Description
The RODE Pin-Back is a replacement back plate with connector cable for the PinMic microphone. This back plate connects through clothing and fabric to the microphone capsule head.
Welcome to the Fuzion Online Store
Pin-Back
Related products
-
STEREO VIDEOMIC
Request for quotationStereo Video Mic – Stereo Condenser Microphone With Integrated Shockmount, HPF And PAD. The RØDE Stereo VideoMic is a high-quality stereo microphone designed for use with camcorders, DSLR cameras and portable audio recorders. Two high-resolution 1/2″ condenser capsules are mounted in a fixed X/Y stereo array, providing a very natural stereo recording, while still offering
Read MoreMore InformationRequest for quotationSTEREO VIDEOMICStereo Video Mic – Stereo Condenser Microphone With Integrated Shockmount, HPF And PAD.
The RØDE Stereo VideoMic is a high-quality stereo microphone designed for use with camcorders, DSLR cameras and portable audio recorders.
Two high-resolution 1/2″ condenser capsules are mounted in a fixed X/Y stereo array, providing a very natural stereo recording, while still offering a high level of rear rejection.
The Stereo VideoMic is an ideal microphone for capturing environmental and ambient sounds, as well as live music. For dialogue and directional applications the RØDE VideoMic and VideoMic Pro are recommended.
An in-built shock mounting system isolates the Stereo VideoMic capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.
Its standard sized shoe mount also includes a 3/8″ thread in the base for easy mounting on a boom pole or stand.
In addition to the microphone’s native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
A -10dB level attenuation (or PAD), selectable from the rear face of the microphone, allows recording of loud sound sources, such as live music or motorsport.
Acoustic Principle : Pressure Gradient
Active Electronics :JFET impedance converter
Capsule : 0.50″
Address Type :End
Frequency Range : 40Hz – 20kHz
Output Impedance : 200Ω
Maximum SPL :134dBSPL
Maximum Output Level :189.0mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity :-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) : 20dBA
Weight :288.00g
Dimensions :65.00mmH x 102.00mmW x 170.00mmD -
RODELINKPF
Request for quotationRodelink Performer Kit -Includes TX-M2 (high quality condenser microphone), RX-DESK (desktop receiver) and LB-1 Lithium-Ion Rechargeable Battery -Series II 2.4 GHz digital transmission -128-bit encrypted signal -Up to 8 Kits can operate simultaneously -Low Handling Noise -Up to 100m* range -Power via included LB-1 Rechargeable Battery, 2 x AA Batteries -Mute Switch -Designed and made
Read MoreMore InformationRequest for quotationRODELINKPFRodelink Performer Kit
-Includes TX-M2 (high quality condenser microphone), RX-DESK (desktop receiver) and LB-1 Lithium-Ion Rechargeable Battery
-Series II 2.4 GHz digital transmission
-128-bit encrypted signal
-Up to 8 Kits can operate simultaneously
-Low Handling Noise
-Up to 100m* range
-Power via included LB-1 Rechargeable Battery, 2 x AA Batteries
-Mute Switch
-Designed and made in Australia
Featuring a high-quality, handheld condenser microphone (TX-M2) and a desktop receiver, the RØDELink Performer Kit is perfect for lectures, Q&As, school presentations, weddings and live performances. Providing one-touch pairing with the RØDELink receiver the microphone can be powered by the new and included RØDE LB-1 Lithium-Ion Battery or 2 x AA Batteries.The RØDELink range is so intuitive it works straight out the box, with no channel selection necessary. Using a secure Series II 2.4GHz encrypted digital transmission sent on two channels simultaneously, RØDELink automatically selects the strongest signal and ensures your audio is as reliable and secure as a cabled connection.
* LB-1 is not included in extended warranty.
RØDELINK PERFORMER KIT SPECIFICATIONS
Transmission type : 2.4 Ghz Fixed Frequency Agile System
System dynamic range : 118dB
Range (distance) : Up To 100m*
Frequency range : 35Hz – 20kHz
Maximum output level : +18dBu
Max input signal level : 140dB SPL
Max latency : 4ms
RECEIVER (RX – DESK)
Power source : DC Power Pack 15v 1A Or DC Power Pack
Antenna : External Diversity Antenna
Output connection : Balanced XLR / Unbalanced 1/4″ Jack
Dimensions : 208mm(W) X 37mm(H) X 166mm(D)
Weight : 792gm
TRANSMITTER (TX – M2)
Power source : Batteries Or USB
Antenna : Diversity Antenna Located At The Bottom Of The TX – M2
Input connection : N/A
Dimensions : 40mm(W) X 256mm(H) X 40mm(D)
Weight : 222gm -
391-006-1
Request for quotationRx-CAM BODY KIT (includes PCBs)
Read MoreMore InformationRequest for quotation391-006-1Rx-CAM BODY KIT (includes PCBs)
-
RODELINKNS
Request for quotationNewsshooter Kit : Wireless XLR Transmitter & Camera Mount Receiver -Series II, 2.4GHz digital transmission -128-bit encryption -Up to 100 metres range* -OLED display (on receiver) -One touch pairing -Five level gain control -AA battery, NP-F battery or USB powered -Locking XLR input and headphone output on transmitter RØDELink represents the next generation of digital
Read MoreMore InformationRequest for quotationRODELINKNSNewsshooter Kit : Wireless XLR Transmitter & Camera Mount Receiver
-Series II, 2.4GHz digital transmission
-128-bit encryption
-Up to 100 metres range*
-OLED display (on receiver)
-One touch pairing
-Five level gain control
-AA battery, NP-F battery or USB powered
-Locking XLR input and headphone output on transmitter
RØDELink represents the next generation of digital wireless systems. Using a Series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Newsshooter Kit provides everything you need to start shooting video wirelessly with XLR microphones, including a camera-mounted receiver and an XLR transmitter. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8″ thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The transmitter (TX-XLR) easily connects to handheld presentation microphones as well as shotgun microphones, with a 3.5mm input and headphone output.* range estimations based on optimal environment
RØDELINK NEWSSHOOTER KIT SPECIFICATIONS
Transmission type : 2.4GHz Fixed Frequency Agile System
System dynamic range : 112dB
Range (distance) : Up To 100m
Frequency range : 35Hz – 22kHz
Maximum output level : 1v Rms (2.8v P-p)
Max input signal level : 1v Rms (2.8v P-p)
Max latency : 4ms
RECEIVER (RX-CAM)
Power source : 2 X AA Battery Or MicroUSB
Antenna : Internal
Output connection : 3.5mm TRS Locking Jack Socket – Dual Mono
Output impedance : 300Ω
Dimensions : 111mm X 65mm X 52mm
Weight : 190gm
TRANSMITTER (TX-XLR)
Power source : 2 X AA Battery, Sony NP-F Battery Or MicroUSB
Antenna : Internal
Input connection : XLR With Locking Collar, 3.5mm TRS Locking Jack Socket
Input impedance : 1kΩ (XLR), 10kΩ (3.5mm)
Dimensions : 120mm X 45mm X 45mm
Weight : 222gm
Reviews
There are no reviews yet.