Description
Boundary microphone. Omni, electret condenser, supplied with TA3M – unterminated 10 meter cable. Black
Boundary microphone. Omni, electret condenser, supplied with TA3M – unterminated 10 meter cable. Black
Multi-Pattern Large Diaphragm Studio Microphone
Boundary microphone. Cardioid, electret condenser, supplied with TA3M – unterminated 10 meter cable. White
Pair of acoustically matched NT1-A 1" cardioid condenser microphones.
Read MoreMore InformationRequest for quotationPair of acoustically matched NT1-A 1" cardioid condenser microphones.
Compact 1/2″ cardioid condenser microphone. -Externally biased condenser -Gold sputtered 1/2” capsule -Heavy-duty satin-nickel plated body -Dual power operation -Surface mount circuitry -Low noise -Full frequency response -Available as Certified Match Pair The NT5 is RØDE’s premier small-diaphragm cardioid condenser microphone, sometimes referred to as a ‘pencil mic’. Intended for recording acoustic instruments, drum overheads,
Read MoreMore InformationRequest for quotationCompact 1/2″ cardioid condenser microphone.
-Externally biased condenser
-Gold sputtered 1/2” capsule
-Heavy-duty satin-nickel plated body
-Dual power operation
-Surface mount circuitry
-Low noise
-Full frequency response
-Available as Certified Match Pair
The NT5 is RØDE’s premier small-diaphragm cardioid condenser microphone, sometimes referred to as a ‘pencil mic’.
Intended for recording acoustic instruments, drum overheads, cy
mbals and live performances, the compact externally polarized mic employs a 1/2″ capsule, an active J-FET impedance converter with bipolar output buffer.
Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Expanding the NT5’s versatility, an interchangeable omnidirectional capsule (NT45-O) is available.
Finished in durable satin nickel, the NT5 available as a single microphone or as an acoustically matched pair.
Acoustic Principle : Pressure Gradient
Active Electronics : JFET impedance converter with bipolar output buffer
Capsule : 0.50″
Address Type :End
Frequency Range : 20Hz – 20kHz
Output Impedance : 100Ω
Maximum SPL : 143dBSPL
Maximum Output Level :13.9mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity :-38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) : 16dBA
Weight :101.00g
Dimensions : 118.00mmH x 20.00mmW x 20.00mmD
Reviews
There are no reviews yet.