Related products

• 

  NT6

  0 out of 5
  Request for quotation

  Compact 1/2″ Condenser Microphone With 3m (10″) Kevlar Reinforced Cable -1/2” condenser capsule with remote preamp -Gold sputtered externally biased condenser -Two position PAD – 0dB and -10dB -Two position High Pass Filter – flat and 80Hz -Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windshield and zip pouch -Heavy duty satin-nickel plated body

  Read MoreMore InformationRequest for quotation
  NT6

  Compact 1/2″ Condenser Microphone With 3m (10″) Kevlar Reinforced Cable

  -1/2” condenser capsule with remote preamp
  -Gold sputtered externally biased condenser
  -Two position PAD – 0dB and -10dB
  -Two position High Pass Filter – flat and 80Hz
  -Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windshield and zip pouch
  -Heavy duty satin-nickel plated body
  -Low noise and full frequency response
  -Designed and manufactured in Australia.
  The RØDE NT6 is an extremely compact 1/2″ cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.

  Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording.

  The microphone is split into two modular components, joined by via a custom 3m (10′) shielded, Kevlar® reinforced cable.

  Featuring a gold-sputtered, true-condenser capsule, the NT6 capsule head measures 45mm (1.8”) in length and weighs only 42gm (1.5oz). The included all-metal, multi-position mounting ring provides 180 degrees of vertical rotation.

  The NT6 preamp-body incorporates both a high-pass filter and pad setting. The high-pass filter can be introduced to cut vibration, rumble and undesired sounds sources under 80Hz, while the PAD offers a -10dB level attenuation, useful when recording louder sound sources.

  The NT6’s small form factor make it an ideal small diaphragm cardioid microphone for use in the Mid-Side (M/S) stereo array, in combination with a figure-8 large diaphragm microphone such as the NT2-A, NT2000 or K2.

  Acoustic Principle : Pressure Gradient
  Active Electronics : JFET impedance converter with bipolar output buffer
  Capsule : 0.50″
  Address Type :End
  Frequency Range : 40Hz – 20kHz
  Output Impedance : 200Ω
  Maximum SPL : 135dBSPL
  Maximum Output Level :6.0mV (@ 1kHz, 1% THD into 1KΩ load)
  Sensitivity :-37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  Equivalent Noise Level (A-weighted) : 19dBA
  Weight :386.00g
  Dimensions : 189.00mmH x 64.00mmW x 20.00mmD

• 

  M1

  0 out of 5
  Request for quotation

  Live Performance Cardioid Dynamic Microphone With Lifetime Warranty -Live dynamic vocal microphone -High output neodymium capsule -Cardioid polar pattern -Balanced, low impedance output -Ergonomically designed heavy duty all-metal body -Low handling noise With rock-solid build quality and a high-power neodymium capsule, the RØDE M1 live dynamic microphone is designed to provide the very best performance,

  Read MoreMore InformationRequest for quotation
  M1

  Live Performance Cardioid Dynamic Microphone With Lifetime Warranty

  -Live dynamic vocal microphone
  -High output neodymium capsule
  -Cardioid polar pattern
  -Balanced, low impedance output
  -Ergonomically designed heavy duty all-metal body
  -Low handling noise

  With rock-solid build quality and a high-power neodymium capsule, the RØDE M1 live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a lifetime warranty, following registration of purchase.

  The M1’s ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone’s internal design.

  Featuring a warm response that is incredibly defined for a dynamic microphone, the M1’s smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback.

  Renowned as one of the industry’s best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.

  Acoustic Principle : Dynamic
  Frequency Range : 75Hz – 18kHz
  Address Type : End
  Output Impedance : 320Ω
  Sensitivity : -56.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  Weight : 360.00g
  Dimensions : 171.00mmH x 51.50mmW x 51.50mmD

• 

  M2

  0 out of 5
  Request for quotation

  Live Performance Super Cardioid Condenser Microphone. Locking On/Off Switch. -Live condenser vocal microphone -Feedback rejecting super-cardioid pick up pattern -Lockable on/off switch -Ergonomically designed heavy duty all-metal body -High level of RF rejection -Low handling noise The RØDE M2 is a rugged live-performance condenser microphone designed to provide a full frequency response and premium performance

  Read MoreMore InformationRequest for quotation
  M2

  Live Performance Super Cardioid Condenser Microphone. Locking On/Off Switch.

  -Live condenser vocal microphone
  -Feedback rejecting super-cardioid pick up pattern
  -Lockable on/off switch
  -Ergonomically designed heavy duty all-metal body
  -High level of RF rejection
  -Low handling noise
  The RØDE M2 is a rugged live-performance condenser microphone designed to provide a full frequency response and premium performance on stage.

  Featuring a tailored-for-stage super-cardioid polar pattern and an internally shock mounted 1/2″ condenser capsule, the M2 provides a high quality alternative to dynamic microphones for live performance. The addition of an on/off switch adds versatility for artists that prefer greater control over their sound, while a lock ensures that the microphone cannot be accidentally switched.

  Acoustic Principle : Pressure Gradient
  Active Electronics : JFET impedance converter with bipolar output buffer
  Capsule : 0.50″
  Address Type : End
  Frequency Range : 35Hz – 20kHz
  Output Impedance : 50Ω
  Maximum SPL : 141dBSPL
  Maximum Output Level : 5.2mV (@ 1kHz, 1% THD into 1KΩ load)
  Sensitivity : -44.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  Equivalent Noise Level (A-weighted) : 23dBA
  Weight : 308.00g
  Dimensions : 187.00mmH x 47.00mmW x 47.00mmD

   

• 

  NTR

  0 out of 5
  Request for quotation

  Premium Ribbon Microphone With Bespoke Transformer. P48 Powered -Highly sensitive 1.8 micron ribbon element -Bi-Directional Polar Pattern -Internal Shock Mounting System -Custom designed and manufactured transformer -Heavy-duty matte black finish -Ribbon-securing travel screw supplied -Designed and manufactured in Australia -One free ribbon replacement during warranty period At first glance of the NTR you’re aware that

  Read MoreMore InformationRequest for quotation
  NTR

  Premium Ribbon Microphone With Bespoke Transformer. P48 Powered

  -Highly sensitive 1.8 micron ribbon element
  -Bi-Directional Polar Pattern
  -Internal Shock Mounting System
  -Custom designed and manufactured transformer
  -Heavy-duty matte black finish
  -Ribbon-securing travel screw supplied
  -Designed and manufactured in Australia
  -One free ribbon replacement during warranty period
  At first glance of the NTR you’re aware that it’s very special and unique – an intricate blend of art and science.

  Designed to hang in the world’s finest recording studios and performance halls equally as well as home studio spaces, its existence is a labour of love for RØDE. Every element of the NTR, from the transformer to the ribbon element itself, has been designed and created in-house at RØDE’s headquarters in Sydney, Australia. All with the aim of crafting the finest ribbon microphone available.

  Sonically, the NTR is capable of reproducing unprecedented high frequency detail and accuracy, addressing common criticisms of other ribbon microphones, while opening up the possible usage scenarios considerably. This allows it to record sound sources that usually require a more sensitive microphone element.

  Acoustic Principle : Velocity Transducer
  Active Electronics : Step-up Transformer and signal balanced preamp stage
  Address Type :Side
  Frequency Range : 20Hz – 20kHz
  Output Impedance : 200Ω
  Maximum SPL : 130dBSPL
  Sensitivity :-30.5dB re 1 Volt/Pascal (30.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  Equivalent Noise Level (A-weighted) : 15dBA
  Weight :1047g
  Dimensions :216mmH x 65mmW x 65mmD